• Pharmaceutical

Plastic Pallets and Crates for Pharmaceutical Handling

Stocked for Controlled Areas

Solid Wall Bins

5 lines

Parts & Totes

3 lines

Rackable Pallets

8 lines

Euro Footprint

1 line

Smooth Wall Bins

1 line

In a controlled area, the handling equipment is part of the contamination picture. Timber is porous, sheds fibres and splinters, and cannot be cleaned to a standard that survives scrutiny. Plastic is non-porous and smooth, has no grain or crevice for residue to sit in, and can be washed down between batches without absorbing what it was holding.

The distinction worth making is between a ribbed bin and a smooth-walled one. Most bulk bins use internal ribs because ribs add stiffness cheaply, and every rib is a ledge where material lodges and a wash can fail to reach. The 650L smooth wall bin removes them: the internal surface is continuous, so product empties more completely and a wash reaches the whole interior.

The smooth wall bin is available in a range of colours, which supports the colour-coded control systems common in regulated production, with one colour per material, per clean state, or per production area. Setting that up at the point of purchase costs nothing; retrofitting it across an existing fleet is expensive and rarely done properly.

  • Non-porous surfaces with no grain, fibre or crevice to harbour residue
  • Smooth internal walls on the 650L, with no ribs or ledges
  • Washable between batches without absorbing product
  • Consistent moulded dimensions, suited to automated handling
  • Available in multiple colours for segregation and clean-state coding

For racked finished goods, specify against the racking figure rather than the dynamic figure, since racking is the limiting condition with nothing supporting the deck underneath. Eight pallets in the range carry a published beam racking rating; the rest are published as racking N/A and are rated for freight and floor use only. Where equipment moves between controlled and general areas, four-way forklift and pallet jack entry removes the repositioning that otherwise happens at every threshold.

On certification we would rather be precise than reassuring. No line in the current range is published with GMP or documented food-contact certification. What is published is the material behaviour that matters in a controlled area: non-porous, washable, splinter-free and dimensionally consistent. Where your quality system requires documented certification for a specific line, tell us which one and we will confirm the status in writing before you order.

Smooth Wall Bulk Bin 650L

Volume: 650 L
Interior: Smooth wall
Beam racking: 800 kg

Nestable Parts Crate 39L

Volume: 39 L
Weight: 1.44 kg
Per pallet: 120

Medium Duty Plastic Pallet 1100 x 1100 mm

SWL: 1.0 t
Beam racking: 1,000 kg
Entry: 4-way

Euro Export Plastic Pallet 1200 x 800 mm

Dynamic: 1,000 kg
Weight: 7.5 kg
Footprint: Euro

Smooth Internal Walls

No ribs or ledges for residue to lodge in on the 650L bin.

Colour Segregation

Multiple colours to support clean-state and material coding.

Non-Porous Throughout

No grain or fibre, unlike timber, so nothing is absorbed.

5 Warehouse Locations

Local stock in every mainland capital for same-week dispatch.

No line in the current range is published with GMP certification, and we will not claim otherwise. What is published is the material behaviour that matters in a controlled area: non-porous, smooth-surfaced, washable and dimensionally consistent. If your quality system requires documented certification, tell us the line and we will confirm its status in writing.

Ribbed bins hold residue in every corrugation, which means scrubbing into each one and still retaining material. A smooth interior washes out in a pass and empties more completely, which cuts cleaning labour and removes a cross-contamination route.

Yes. The 650L smooth wall bin is available in a range of colours. Contact our team for the current colour list if you are setting up a coded system.

Plastic holds a consistent moulded dimension, which is why sites running conveyors and automated storage move off timber. Automated systems have specific tolerance and underside requirements, so send us your system specification before ordering for an automated application.

Plastic does not absorb moisture or swell in cold storage, unlike timber. Confirm the rated temperature range with our team for your specific process, including any hot wash cycle.

Specifying for a Controlled Area?