HEAVIEST SQUARE EXPORT · LIGHT RACKING

Export Plastic Pallet 1100×1100 mm SWL 1.2t

In stock, 5 warehouses | SMPP-1111SL2

Collect or deliver from

Perth warehouse:15 Ashby Close, Forrestfield WA 6058 · 0479 078 630

Sydney Warehouse: 1/11-21 Forge St, Blacktown NSW 2148 · 02 9601 6115.

Melbourne Warehouse: 21 Jets Court, Melbourne Airport VIC 3045 · 03 9338 1331

Brisbane Warehouse: Shed 3.1, 221 Gooderham Rd, Willawong QLD 4110 · 07 3275 2665

Adelaide Warehouse: 6 Leeds St, Woodville North SA 5012 · 08 9353 3113

Built for Australian businesses

The 1100 x 1100 mm square footprint is the workhorse size for container freight between Australia, New Zealand and Asian ports. Most of the pallets in that size are built down to a price, rated around a tonne, and good for one direction only. This one is built to carry more and to keep working after it lands.

Rated 1,200 kg dynamic under a forklift or pallet jack, 4,000 kg static when block-stacked, and 600 kg in selective beam racking, it is the heaviest-rated square export pallet in the Swan MS range. The racking figure is the one that changes how the pallet gets used: goods arriving on it can go straight into light racking rather than being transferred, which removes a double-handling step and the damage risk that comes with it.

At 150 mm high and 10.3 kg it is heavier than the 7.5 kg one-way pallets, and that is where the additional capacity comes from. For consignments where the load is dense enough to need 1.2 tonnes, or where the receiving end will rack it, the extra 2.8 kg of tare is a sound trade.

The grill top deck keeps tare down and lets water and debris fall through rather than pooling. Four-way entry on both forklift and pallet jack means any receiving warehouse can handle it regardless of equipment. As plastic, it is exempt from ISPM 15 no heat treatment, no fumigation, no treatment stamp, no port hold and will not absorb moisture, swell or host pests through a humid container crossing.

Rackable on arrival

600 kg beam rating removes a transfer step and the damage it causes.

No orientation decisions

Square pallets load the same way every time.

Clears customs cleanly

ISPM 15 exemption removes treatment cost and port delay.

Survives the crossing

No moisture uptake, swelling or mould in a humid container.

Technical specifications

Product type

One-Way Export

Dimensions (L x W x H)

1100 x 1100 x 150 mm (± 5 mm)

Pallet weigh

10.3 kg

Static load (unified)

4000 kg

Dynamic load (unified)

1200 kg

Handling

4-Way Forklift & 4-Way Pallet Jack Entry

Racking capacity (beam)

600 kg

Racking capacity (drive-in)

Not rated

Colour

Black

Minimum order quantity

20 units

What 2,000 kg SWL means
in practice

Safe working load (SWL) depends on how the pallet is supported.

Static is sitting still on a flat floor; dynamic is
moving on a forklift or jack; racking is spanning beams with no support underneath.

Static floor, block-stacked

4,000 kg

Dynamic forklift / pallet jack

1,200 kg

Racking, selective beam

600 kg

Drive-in racking

N/A

Where this pallet is used

Compare with similar options

Export Pallet 110 x 110 cm

Export Pallet 120 x 100

Export Pallet 120 x 100 cm

Timber Pallet

Rated SWL

1.2t

1.2t

1.0t

Varies by build

Best for

Heavier export consignments on a square footprint

Racking & domestic transport

International sea and air freight

General, one-way

Export treatment

None needed (ISPM 15 exempt)

None needed

None needed

Heat treatment / fumigation

Washable

Yes

Yes

Yes

No, absorbs moisture

You’re viewing this

View pallet

View pallet

–

All plastic pallet variants in the Swan MS range

Same footprint, different capability. This one is 150 mm high, 10.3 kg, rated 1,200 kg dynamic with a 600 kg beam racking rating. The 1.0t is 120 mm high, 7.5 kg, rated 1,000 kg dynamic with no racking rating. Choose this one for heavier loads or where the pallet will be racked; choose the 1.0t for the lowest freight cost.

Yes, to 600 kg in selective beam racking. Do not load racking to the 1,200 kg dynamic figure racking is the limiting condition because the deck is unsupported underneath.

Yes. It is the common square footprint for container freight across Australia and New Zealand, and it stows efficiently in standard containers.

No. ISPM 15 regulates timber packaging only, so plastic pallets ship internationally without heat treatment, fumigation or a treatment certificate.

Identical ratings 1,200 kg dynamic, 4,000 kg static, 600 kg beam racking and the same 150 mm profile and 10.3 kg tare. The only difference is footprint. Pick the square 1100 for Australia/NZ lanes, and 1200 x 1000 for wider international lanes.

Plastic does not absorb moisture or swell in cold storage, unlike timber. Confirm the temperature resistance range with our sales team for your specific application.

20 units, with an additional fee applied to smaller orders.

Get a trade quote on this
pallet

Tell us the quantity and delivery postcode. We reply with pricing, stock at your nearest warehouse and freight, usually within 4 business hours.

Call 0479 078 630

sales@swanms.com.au

Perth

15 Ashby Close, Forrestfield
WA 6058

Sydney 1

1/11-21 Forge St, Blacktown
NSW 2148
02 9601 6115

Sydney 2

Dock 10/56 Jones St, Pendle
Hill NSW 2145
02 9601 6115

Melbourne

21 Jets Court, Melbourne
Airport VIC 3045
03 9338 1331

Brisbane

Shed 3.1, 221 Gooderham
Rd, Willawong QLD 4110
07 3275 2665

Adelaide

6 Leeds St, Woodville North
SA 5012
08 9353 3113