AUSTRALIAN STANDARD · HEAVY DUTY

Heavy Duty Warehouse Pallet 1165 x 1165 mm SWL 2.0t

In stock, 5 warehouses | SMPP-116116W

Collect or deliver from

Perth warehouse:15 Ashby Close, Forrestfield WA 6058 · 0479 078 630

Sydney Warehouse: 1/11-21 Forge St, Blacktown NSW 2148 · 02 9601 6115.

Melbourne Warehouse: 21 Jets Court, Melbourne Airport VIC 3045 · 03 9338 1331

Brisbane Warehouse: Shed 3.1, 221 Gooderham Rd, Willawong QLD 4110 · 07 3275 2665

Adelaide Warehouse: 6 Leeds St, Woodville North SA 5012 · 08 9353 3113

Built for Australian businesses

Warehouse pallets live a different life to export pallets. They are not shipped out and written off; they cycle through the same racking, the same forklifts and the same floor for years. What matters is not how light they are, but how long they hold their shape.

The Heavy Duty Warehouse Pallet 1165 x 1165 mm is specified for that duty. Its 24.3 kg tare is deliberate the extra mass over the 17.6 kg heavy duty pallet is deck thickness and runner section, which is what resists the slow deflection that eventually makes a loaded pallet unsafe in beam racking. Rated to 2,000 kg in selective beam racking, 1,000 kg in drive-in, 2,000 kg dynamic under a forklift and 10,000 kg static when block-stacked, it is specified for the heaviest loads Swan MS supplies for.

Its footprint is an exact 1165 x 1165 mm the Australian standard so it is dimensionally interchangeable with the timber pallets already in your racking, with no beam adjustment and no change to load planning. The 153 mm profile is slightly lower than the 160 mm heavy duty variant, which returns a small amount of usable height per beam level. Across a tall selective racking run, that adds up.

Entry is two-way for both forklifts and pallet jacks. In a fixed warehouse layout where approach direction is consistent, two-way entry is not a constraint, and the solid runner construction it allows is part of why this pallet holds its rating under sustained load.

As plastic, it does not absorb moisture, harbour pests, splinter, or need fumigation for export. It washes down between product changes, resists most warehouse chemicals, and does not degrade in chillers or outdoor yard storage.

Drop-in replacement for timber

Exact standard footprint means no re-racking, no re-planning, no change to 3PL handling.

Recovers headroom

The 153 mm profile frees usable height at every beam level across a selective run.

Fixed-site economics

A pallet that stays on your floor for years has a far lower cost per movement than timber replaced each season.

Audit-ready

Washable, non-absorbent, no splinters or nails.

Technical specifications

Product type

Heavy Duty

Dimensions (L x W x H)

1165 x 1165 x 153 mm (± 5 mm)

Pallet weigh

24.3 kg

Static load (unified)

10000 kg

Dynamic load (unified)

2000 kg

Handling

2-Way Forklift & 2-Way Pallet Jack Entry

Racking load

N/A (beam & drive-in)

Colour

Black

Minimum order quantity

20 units

What 2,000 kg SWL means
in practice

Safe working load (SWL) depends on how the pallet is
supported. Static is sitting still on a flat floor; dynamic is
moving on a forklift or jack; racking is spanning beams with no support underneath.

Read: plastic pallet load ratings explained

Static floor, block-stacked

10,000 kg

Dynamic forklift / pallet jack

2,000 kg

Racking, selective beam

2,000 kg

Racking, drive-in

1,000 kg

Where this pallet is used

Compare with similar options

Heavy Duty Warehouse Pallet 116 x 116 cm

Heavy Duty Pallet 116 x 116

Medium Duty Export Pallet 110 x 110

Timber Pallet

Rated SWL

2.0t

2.0 t

1.0 t

Varies by build

Best for

Long-term block-stacked floor storage

Racking & domestic transport

Retail and half loads

General, one-way

Export treatment

None needed (ISPM 15 exempt)

None needed

None needed

Heat treatment / fumigation

Washable

Yes

Yes

Yes

No, absorbs moisture

You’re viewing this

View pallet

View pallet

–

All plastic pallet variants in the Swan MS range

The load ratings are identical. This pallet is 24.3 kg against 17.6 kg, has a 1165 x 1165 x 153 mm footprint against 1160 x 1160 x 160 mm, and uses two-way rather than four-way forklift entry. Specify this one for pallets that stay loaded in racking on a fixed site; specify the lighter one where pallets are moved often or approached from varying directions.

Yes. 1165 x 1165 mm is the Australian standard pallet footprint, which is why it suits domestic racking, truck decks and third-party logistics systems without modification.

In a fixed warehouse layout where the approach direction is consistent, no. Two-way entry allows the solid runner construction that supports the sustained-load rating. If your operators need to approach from any side, the Heavy Duty Pallet 116 x 116 SWL 2.0t offers four-way entry at the same ratings.

Yes that is the duty it is specified for. The heavy-section deck resists the progressive deflection that causes under-specified pallets to fail after extended loaded storage. Store to the 2,000 kg beam racking figure, not the static figure.

No. ISPM 15 covers timber packaging only, so plastic pallets are exempt from heat treatment and fumigation and pass quarantine without treatment certificates.

15 units, with an additional fee applied to smaller orders.

Get a trade quote on this
pallet

Tell us the quantity and delivery postcode. We reply with pricing, stock at your nearest warehouse and freight, usually within 4 business hours.

Call 0479 078 630

sales@swanms.com.au

Perth

15 Ashby Close, Forrestfield
WA 6058

Sydney 1

1/11-21 Forge St, Blacktown
NSW 2148
02 9601 6115

Sydney 2

Dock 10/56 Jones St, Pendle
Hill NSW 2145
02 9601 6115

Melbourne

21 Jets Court, Melbourne
Airport VIC 3045
03 9338 1331

Brisbane

Shed 3.1, 221 Gooderham
Rd, Willawong QLD 4110
07 3275 2665

Adelaide

6 Leeds St, Woodville North
SA 5012
08 9353 3113