SHALLOW DEPTH · 5,000 kg STATIC

Rigid Bulk Bin 353L Shallow Depth

In stock, 5 warehouses | SMPC-353R

Collect or deliver from

Perth warehouse:15 Ashby Close, Forrestfield WA 6058 · 0479 078 630

Sydney Warehouse: 1/11-21 Forge St, Blacktown NSW 2148 · 02 9601 6115.

Melbourne Warehouse: 21 Jets Court, Melbourne Airport VIC 3045 · 03 9338 1331

Brisbane Warehouse: Shed 3.1, 221 Gooderham Rd, Willawong QLD 4110 · 07 3275 2665

Adelaide Warehouse: 6 Leeds St, Woodville North SA 5012 · 08 9353 3113

Built for Australian businesses

Some bins are storage, and some bins are workstations. When people are sorting, grading, picking or packing directly out of a container for a full shift, wall height stops being a capacity question and becomes an ergonomics question.

At 440 mm the Rigid Bulk Bin 353L has the lowest wall of any bulk bin in the Swan MS range roughly mid-thigh rather than waist-height. Reaching the base requires no leaning over a rim, which makes it genuinely workable as a line-side container for a full shift rather than something people fight with.

It holds 353 litres on the full Australian standard 1165 x 1165 mm footprint. As with the 528L, the reduced capacity comes entirely from height, so there is no penalty in floor efficiency the bin occupies one standard pallet space exactly as a deep bin does.

Static capacity is 5,000 kg block-stacked, the joint highest in the Swan MS crate range, which supports deep stacking of empty or lightly loaded bins and high floor storage of dense product. Dynamic and racking capacity are 200 kg, the lowest in the range. That figure is the constraint and it is unambiguous: this bin is for static and manual work, not for carrying weight around on forks or storing at height. Check it against your handling pattern before specifying.

At 27.5 kg it is the lightest bulk bin in the range and the easiest to reposition empty. Entry is two-way for both forklift and pallet jack. Beige or cream finish, with an optional lid available.

Lightest bulk bin to reposition

27.5 kg empty.

Best ergonomics in the range

A 440 mm wall means no leaning over a rim, shift after shift.

No floor-space penalty

Full standard footprint; you lose depth, not area.

Highest static rating

5,000 kg supports dense floor storage and deep stacking.

Technical specifications

Product type

Rigid Bulk

External Dimensions (L x W x H)

1165 x 1165 x 440 mm (± 5 mm)

Volume

353 L

Weight (tare)

27.5 kg

Static load (unified)

5000 kg

Dynamic load (unified)

200 kg

Handling

2-Way Forklift & 2-Way Pallet Jack Entry

Racking capacity (beam)

200 kg

Racking capacity (drive-in)

Not rated

Colour

Beige or Cream

Minimum order quantity

5 units

Lid

Optional, supplied as an extra

What 2,000 kg SWL means
in practice

Safe working load (SWL) depends on how the crate is supported.

Static is sitting still on a flat floor; dynamic is
moving on a forklift or jack; racking is spanning beams with no support underneath.

Static floor, block-stacked

5,000 kg

Dynamic forklift / pallet jack

200 kg

Racking, selective beam

200 kg

Drive-in racking

N/A

Where this crate is used

Compare with similar options

Rigid Bulk Smaller

Rigid Bulk Medium

Rigid Bulk Non Vented Nally

Rigid Bulk Crate

Volume

353 L

528 L

755 L

600 L

Best for

Sorting, grading and inspection lines

Deep block-stacked floor storage

Contamination control

Hygiene and cleaning

Export treatment

None needed (ISPM 15 exempt)

None needed

None needed

None needed

Washable

Yes

Yes

Yes

Yes

You’re viewing this

View crate

View crate

View crate

All plastic crates variants in the Swan MS range

440 mm the shallowest bulk bin Swan MS supplies, roughly half the depth of the 755L and 780 mm bins. That is what makes it workable by hand for a full shift.

353 litres on a 1165 x 1165 x 440 mm external footprint. Internal dimensions are not currently published contact our sales team if you need them for load planning.

To 300 kg in selective beam racking, which is low. For racked bulk storage at weight, the Rigid Bulk Crate 600L at 800 kg or the Nally bins at 500 kg are better suited. This bin is specified primarily for floor storage.

To 200 kg only. This is the lowest dynamic rating in the Swan MS crate range, so check your loaded weight carefully. For bins that move loaded, the 600L rigid bulk crate at 1,000 kg dynamic is the appropriate choice.

To 200 kg in beam racking, which is low. It is specified primarily for floor and line-side use, not racked storage.

Static load is carried with the bin sitting still on a flat floor with full support beneath it, which is a far less demanding condition than being carried on forks. The shallow, wide form also distributes load well. It makes the bin a good choice for dense material in floor storage.

Yes 1165 x 1165 mm is the Australian standard pallet footprint, so it occupies exactly one pallet space.

5 units.

Get a trade quote on this
crate

Tell us the quantity and delivery postcode. We reply with pricing, stock at your nearest warehouse and freight, usually within 4 business hours.

Call 0479 078 630

sales@swanms.com.au

Perth

15 Ashby Close, Forrestfield
WA 6058

Sydney 1

1/11-21 Forge St, Blacktown
NSW 2148
02 9601 6115

Sydney 2

Dock 10/56 Jones St, Pendle
Hill NSW 2145
02 9601 6115

Melbourne

21 Jets Court, Melbourne
Airport VIC 3045
03 9338 1331

Brisbane

Shed 3.1, 221 Gooderham
Rd, Willawong QLD 4110
07 3275 2665

Adelaide

6 Leeds St, Woodville North
SA 5012
08 9353 3113